Pegas 30" Scroll Saw
The 30" Pegas is the most modernly engineered, (and we think best looking) scroll saw available. Users instantly notice the difference, even from other similar saws, including easier blade changes, quieter operation and ...
Pegas® Scroll Saw - 30 Inch Throat Depth - Pegas is the most popular Scroll Saw Today!
Pegas® Scroll Saws are high-precision tools, which with a minimum amount of maintenance, will provide reliable service and great satisfaction for many years.
Each scroll saw saw purchase also comes with:
- Sample Kit of 18 Pegas® Scroll Saw Blades
- Assembly and Usage Instructions
- Detailed Blade Selection Chart
- Replacement Parts for the Pegas® Blade Chuck Head
Why is the Pegas® Scroll Saw better?
This precision machined tool features a time-tested design enhanced by Swiss engineering. The Pegas® Scroll Saw features a tilting-arm design that allows you to cut on an angle while the table stays flat. The arm tilts 45-degrees to the left and 35-degrees to the right (because of the dust collection nozzle). The top arm lifts, which makes it easy to top or bottom feed the scroll saw blades. The variable speed control, which sits on the top of the saw arm (in the front near the power switch) allows you to adjust from 400 to 1,500 rpms.
The saw comes complete with the revolutionary Pegas® Blade Chuck Heads (a $95USD value). These lightweight blade chucks grip blades better and reduce vibration. It also features a non-stick heavy-duty thick epoxy coating on the table that allows the projects to just glide around and reduces the chance of corrosion.
A Saw Stand and Foot Switch are available as add-ons.
Pegas® Scroll Saws Offer Many Valuable Benefits!
- The Head can be tilted by 45°-35° to left or right. The blade tilts rather than the table to achieve better control, precision and comfort.
- The Upper Arm lifts to allow easy and rapid blade changes: a real advantage for work involving various interior cuts - this makes threading blades a whole lot easier!
- Even quicker blade changing thanks to the Pegas® Blade Chuck Heads. The manual blade-clamping system does not require the use of a tool. Meanwhile the tensioning system allows the same tension to be applied to the blade whenever it is changed.
- Easy access to the start/stop switch and the speed regulator, positioned on the front of the upper arm.
- Made of sheet steel with 7 mm thick solid table top (13.5 x 30 inches) with special coating for enhanced smoothness
- The onboard dust blower paired with the dust collector provide direct and efficient dust extraction.
To attach your vacuum to the dust collection port, you can slide a hose inside the port, or use expansion or reducing sleeves to connect your dust collection system.
Click Here to Write a Review | Explore all
Featured positive reviews:
The Pegas scroll saw arrived in great condition, albeit with a broken installed blade. The saw is quiet with minimal vibration and performs perfectly. I had to adjust the table to centre the blade which thanks to the 4 hex key screws on the table is a fairly simple quick task. The Dewalt can handle a full 2" piece of stock whereas the Pegas is limited to 1 3/4" stock. Love the dust control built in the saw - works great. One of the best features is that the table remains flat while the head tilts making it easier to control the workpiece. The air blower has a good volume of airflow to keep the lines visible on the pattern. I use a foot pedal to keep my hands & eyes on the work making the scroll saw a very safe tool to operate.
The Pegas 30" scroll saw is my 3rd. one. Stepping up each time as I gained experience. I don't see myself ever needing a step up from this one. Smoothest running saw I have ever encountered. I bought the Pegas stand built for the saw. Heavy, sturdy and mostly follow the assy. instructions. Every piece fits perfectly as long they are connected exactly as directed.
Need help? Pegas has a super Customer Service that goes beyond expectations.
Shipping Details
Shipping Comes directly from our New Jersey Warehouse via UPS - Please pay as instructed at checkout.
| Specifications | 30" Scroll Saw from Pegas |
| Throat Depth (Blade to the back of the saw) | 30 inches |
| Total Length | Width | Height | 46.1 inches | 16.8 inches | 19.7 inches |
| Blade Tilt Range | 45/35º |
| Max Cutting Depth | 2.05 inches |
| Speed RPM | Motor | 400 - 1400 RPM |1.5 Amp on 110V |
| Table Size | 13.5 inches wide x 30 inches deep |
| Weight | Origin | 104 lbs | Taiwan |
Warranty
1 year parts warranty.
Service directly from the manufacturer via their office in New Jersey, USA. Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician. From time to time a part will need servicing beyond what we can help with by phone and sending parts. In those cases, we'll arrange for the saw to be sent to New Jersey.
Shipping Details
Shipping Comes directly from our New Jersey Warehouse. Note: We're working on lowering the shipping rates so you may get a refund, but we also may have to charge a bit more depending on your location. Generally we see some locations getting refunds of up to $20, and others we ask for a bit more (up to around $20). Notably, there is an exception for outside continental USA which costs more. This product will ship within three business days of placing your order. Please note, we are not open on holidays or weekends.
Warranty
1 year parts warranty.
Please inspect the saw upon unboxing and notify us immediately of anything you see that concerns you. Service directly from the manufacturer via their office in New Jersey, USA. Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician. From time to time a part will need servicing beyond what we can help with by phone and sending parts. In those cases, we'll arrange for the saw to be sent to New Jersey.
| Add the Pegas Foot Switch to your Scroll Saw Order for $64.99 Or Click Here to Learn about the Foot Switch |
 |
|
| Add the Stand made specifically for the Pegas Scroll Saw 30 Inch for $279.99 Or Click Here to Read about the Stand. |
 |
|
| Add the fluorescent Inspection Lamp for $102.95 or Click here to Read about the Inspection Lamp with adjustable viewing arm. |
 |
|
| Add the LED Inspection Lamp for $151.95 or Click here to Read about the Inspection Lamp with adjustable viewing arm. |
|
|
|
Add the Beginner's Sample Pack with 17 dozen blades for $99.00 |
 |
|
|
Add the Bestsellers Sample Pack with 24 dozen for $137.00 or |
 |
Pegas® Scroll Saw - 30 Inch Throat Depth - Pegas is the most popular Scroll Saw Today!
Pegas® Scroll Saws are high-precision tools, which with a minimum amount of maintenance, will provide reliable service and great satisfaction for many years.
Each scroll saw saw purchase also comes with:
- Sample Kit of 18 Pegas® Scroll Saw Blades
- Assembly and Usage Instructions
- Detailed Blade Selection Chart
- Replacement Parts for the Pegas® Blade Chuck Head
Why is the Pegas® Scroll Saw better?
This precision machined tool features a time-tested design enhanced by Swiss engineering. The Pegas® Scroll Saw features a tilting-arm design that allows you to cut on an angle while the table stays flat. The arm tilts 45-degrees to the left and 35-degrees to the right (because of the dust collection nozzle). The top arm lifts, which makes it easy to top or bottom feed the scroll saw blades. The variable speed control, which sits on the top of the saw arm (in the front near the power switch) allows you to adjust from 400 to 1,500 rpms.
The saw comes complete with the revolutionary Pegas® Blade Chuck Heads (a $95USD value). These lightweight blade chucks grip blades better and reduce vibration. It also features a non-stick heavy-duty thick epoxy coating on the table that allows the projects to just glide around and reduces the chance of corrosion.
A Saw Stand and Foot Switch are available as add-ons.
Pegas® Scroll Saws Offer Many Valuable Benefits!
- The Head can be tilted by 45°-35° to left or right. The blade tilts rather than the table to achieve better control, precision and comfort.
- The Upper Arm lifts to allow easy and rapid blade changes: a real advantage for work involving various interior cuts - this makes threading blades a whole lot easier!
- Even quicker blade changing thanks to the Pegas® Blade Chuck Heads. The manual blade-clamping system does not require the use of a tool. Meanwhile the tensioning system allows the same tension to be applied to the blade whenever it is changed.
- Easy access to the start/stop switch and the speed regulator, positioned on the front of the upper arm.
- Made of sheet steel with 7 mm thick solid table top (13.5 x 30 inches) with special coating for enhanced smoothness
- The onboard dust blower paired with the dust collector provide direct and efficient dust extraction.
To attach your vacuum to the dust collection port, you can slide a hose inside the port, or use expansion or reducing sleeves to connect your dust collection system.
Click Here to Write a Review | Explore all
Featured positive reviews:
The Pegas scroll saw arrived in great condition, albeit with a broken installed blade. The saw is quiet with minimal vibration and performs perfectly. I had to adjust the table to centre the blade which thanks to the 4 hex key screws on the table is a fairly simple quick task. The Dewalt can handle a full 2" piece of stock whereas the Pegas is limited to 1 3/4" stock. Love the dust control built in the saw - works great. One of the best features is that the table remains flat while the head tilts making it easier to control the workpiece. The air blower has a good volume of airflow to keep the lines visible on the pattern. I use a foot pedal to keep my hands & eyes on the work making the scroll saw a very safe tool to operate.
The Pegas 30" scroll saw is my 3rd. one. Stepping up each time as I gained experience. I don't see myself ever needing a step up from this one. Smoothest running saw I have ever encountered. I bought the Pegas stand built for the saw. Heavy, sturdy and mostly follow the assy. instructions. Every piece fits perfectly as long they are connected exactly as directed.
Need help? Pegas has a super Customer Service that goes beyond expectations.
Shipping Details
Shipping Comes directly from our New Jersey Warehouse via UPS - Please pay as instructed at checkout.
| Specifications | 30" Scroll Saw from Pegas |
| Throat Depth (Blade to the back of the saw) | 30 inches |
| Total Length | Width | Height | 46.1 inches | 16.8 inches | 19.7 inches |
| Blade Tilt Range | 45/35º |
| Max Cutting Depth | 2.05 inches |
| Speed RPM | Motor | 400 - 1400 RPM |1.5 Amp on 110V |
| Table Size | 13.5 inches wide x 30 inches deep |
| Weight | Origin | 104 lbs | Taiwan |
Warranty
1 year parts warranty.
Service directly from the manufacturer via their office in New Jersey, USA. Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician. From time to time a part will need servicing beyond what we can help with by phone and sending parts. In those cases, we'll arrange for the saw to be sent to New Jersey.
Shipping Details
Shipping Comes directly from our New Jersey Warehouse. Note: We're working on lowering the shipping rates so you may get a refund, but we also may have to charge a bit more depending on your location. Generally we see some locations getting refunds of up to $20, and others we ask for a bit more (up to around $20). Notably, there is an exception for outside continental USA which costs more. This product will ship within three business days of placing your order. Please note, we are not open on holidays or weekends.
Warranty
1 year parts warranty.
Please inspect the saw upon unboxing and notify us immediately of anything you see that concerns you. Service directly from the manufacturer via their office in New Jersey, USA. Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician. From time to time a part will need servicing beyond what we can help with by phone and sending parts. In those cases, we'll arrange for the saw to be sent to New Jersey.
| Add the Pegas Foot Switch to your Scroll Saw Order for $64.99 Or Click Here to Learn about the Foot Switch |
|
|
| Add the Stand made specifically for the Pegas Scroll Saw 30 Inch for $279.99 Or Click Here to Read about the Stand. |
|
|
| Add the fluorescent Inspection Lamp for $102.95 or Click here to Read about the Inspection Lamp with adjustable viewing arm. |
|
|
| Add the LED Inspection Lamp for $151.95 or Click here to Read about the Inspection Lamp with adjustable viewing arm. |
|
|
|
Add the Beginner's Sample Pack with 17 dozen blades for $99.00 |
|
|
|
Add the Bestsellers Sample Pack with 24 dozen for $137.00 or |
|
Add to Cart
Scroll Saw Chuck Heads by Pegas - For Excalibur Type Saws - Also Works with DeWalt - see list
Home
Wishlist
Account
Cart